How to use the oil purifier safely?

During use, in order to better exert its efficiency, safe operation is very important. In order to facilitate more users to understand and use it, the safe use method of its equipment is introduced to facilitate users to understand and use it.

1. During on-site operations, try to be close to the transformer or oil tank; the oil suction pipeline should not be too long, and minimize pipeline resistance.

2. The connecting pipeline (including the oil tank) must be thoroughly cleaned in advance and have good sealing.

3. Strictly follow the operating procedures. When starting, wait for the vacuum pump, oil pump and heater to operate normally to ensure internal circulation before the oil can be circulated.

4. The purified oil contains a large amount of mechanical impurities and free water. Before using vacuum equipment for filtration, the water and impurities at the bottom must be removed in advance, and then other filtering equipment (such as centrifugal and pressure types) must be used for full filtration to meet the required crude oil standards, thereby affecting the service life of the equipment.

5. During operation, the operation (such as vacuum, flow, temperature, etc.) should be strictly monitored, and the quality of the oil before and after treatment (breakdown voltage, etc.) should be regularly checked. Monitor the purification function.

6. During winter operation, pipes, vacuum tanks and other components should be insulated, and the substation should comply with the relevant provisions of the power industry's safety operating procedures issued by the power industry when filtering oil.